Monel* 400 /UNS N0. 4400 Wire Mesh|•Nickel - Copper alloy wire cloth|metal mesh|metal woven wire mesh
•Nickel - Copper alloy, containing minimum 63% Nickel
•Resistant to corrosion and acids
•Ideal for marine applications
•Corrosion resistance with precious metals
•More expensive than stainless steel
•7-10 day lead time is typical
More information about Monel* 400 Wire Mesh
OVERVIEW
Monel 400® is woven into an extremely corrosion resistant wire mesh material. This is a plain square weave (over one, under one). Weaving meets ANSI/AWCI - 01 -1992 and ASTM E 2016-99 and RRW 360
This alloy contains approximately 67% nickel, 28% copper, and 5% other elements.
Werkstoff No. W.Nr. 2.4360, W.Nr. 2.4361
UNS N0. 4400
Resists salt and fresh water. Good around most food. It is considered a high strength material.
Monel 400® MAXIMUM CONTINUOUS SERVICE TEMPERATURE IN AIR
538°C 1000°F
Monel* 400 Wire Mesh - Examples of Uses
Marine parts
Pump screens
Chemical process equipment meshes.
dipping baskets for the pickling of steel,
filters for dry cleaning solvents
filters for dyeing chemicals for the textile industry
food processing
Monel* 400 Wire Mesh - Cutting
Monel* 400 meshes cut easily with good quality hand tools. The heavy meshes from 2 mesh through 50 mesh is best cut with Aircraft style shears or tin snips. To cut 60 mesh and finer, you can use a common scissor
Monel* 400 Wire Mesh - Choosing a mesh size
For someone unfamiliar with wire mesh terminology, 2 mesh has two wires in each direction in a square inch. You could easily pass a pencil through the openings.
16 mesh is what is used in a window or porch screens to keep out common insects. 60 mesh is the size commonly used in kitchen faucets. An 80 mesh has an opening which will barely pass a human hair. A piece of paper is about three thousandths (.003) of an inch. Monel* 400 wire mesh samples are available and can be ordered online.
Monel* 400 Wire Mesh - Discs
500 standard disc diameters
Same day delivery on stock items
Tolerance to +/- .001 inch
Special diameters in three days
To get a quote for Monel* 400 meshdiscs: Indicate disc diameter, mesh and quantity.
(* Monel is a registered trademark of International Nickel Co.)
